Flying Voice Technology ip622 - 7 Configuration; Web-Based Configuration; Login

Page
30
of
70
7 CONFIGURATION
7.1 Web-based Configuration
This section will show you how to configure your IP622 using the web-based configuration interface. The default network settings are the
following:
Default Internet Connection Type: DHCP
Default PC Port Connection Type: NAT
Default user name and password of admin mode
admin, admin
Default user name and password of user mode:
user,user
Web Idle Timeout: 5 min
7.2 Login
To access the phone through a web browser
Step 1.Setup IP622 correctly
Step 2.Lookup the Internet IP Address in the left side of LCD
Step 3.Enter “http://Internet IP Address” in the address field of the browser.
Step 4.Type “admin” or “user” for the User Name, and input the password click on the Login button to access the configuration page.
There are two levels of web configuration: one “user” ID level that can view just some portion in the web, and the other “admin” ID
level that can view and configure all settings in the web-based configuration interface.