Flying Voice Technology ip622 - Dial Plan Syntactic

Page
50
of
70
7.7.3.2 Dial Plan Syntactic
No.
String
Description
1
0 1 2 3 4 5 6 7 8 9
* #
Legal characters
2 X Lowercase letter x stands for one legal character
3 [sequence]
To match one character form sequence.
For example:
• [0-9]: match one digit form 0 to 9
• [23-5*]: match one character from 2 or 3 or 4 or 5 or *
4 x.
Match to , , , …...
For example:
“01.”: can match ”0”, “01”, “011”, ”0111”, …….., ”01111…”
5
<dialed:
substituted>
Replace dialed with substituted.
For example：
<8:1650>123456：input is “85551212”, output is“16505551212”
6 x,y
Make outside dial tone after dialing “x”, stop until dialing character “y”
For example：
“9,1xxxxxxxxxx”:IP622 make outside dial tone after inputting “9”, stop tone until inputting “1”
“9,8,010x”: make outside dial tone after inputting “9”, stop tone until inputting “0”
7 T
Set the delayed time.
For example:
“<9:111>T2”: IP622 will dial out the matched number “111” after 2 seconds.