Step 1.Press Menu button, and then choose 4Text Message by using the up button or the down button.
Step 2.Press the select softkey button to enter to 1SEND item.
Step 3.Press the select softkey button to edit message.
Note: When inputting text, use the abc softkey button to change the input method among numbers, capital and lowercase English letters,
abc stands lower case, ABC stands capital letter, and 123 stands digit
Step 4.Press the ok
softkey button
to input receivers’ phone number.
Notice: IP622 support group mails, user can send one message to 10 friends or family one a time;
Press the ok softkey button to access to configuration the next receiver’s phone number;
You can select one number in phonebook by pressing the pbook softkey button.
If user has configuration the phone numbers which you want to send, press the ok
softkey button
twice to access to the next
item (Sender number).
Step 5.Set Sender phone number, default is line1’s phone number.
Step 6.Press the select
softkey button
to start sending message.
Step 1.Press Menu button, and then choose 4Text Message by using the up button or the down button.
Step 2.Press the select
softkey button
to enter to 2Recived Box item or Send Box item.
Notice: In Received Box are messages have received from others including new messages and old messages. The ones in Sent Box are
messages have sent out.
Step 3.Press the select
softkey button
to access to the next item. Choose the message you want to read by using the up button or the down
To Next Page
Loading...