SIP/RTP/Data
Qos
Default is 0, user can set from 0~63.
User can configure the parameters of Internet Port, PC port and Network Address Server Settings (DHCP). The details are as follows:
7.6.1.1 Internet Port (WAN)
Static:
In static mode, user should fill in the values of IP Address, Subnet Mask, Default Gateway, Primary DNS and Second DNS got from your
administrator.
This parameter is the WAN port service mode,
user can set the parameters in Multi WAN page.
Connection mode, it si IPv4.
The IP address of Internet port
The subnet mask of Internet port.
The default gateway of Internet port.
The primary DNS of Internet port.
The second DNS of Internet port.