107 Issue/Rev. 03 (8/97)
Entry Alarm
0 = Clearable
1 = Not Clearable
31 PA: Power-fail (Set at entry 186)
32 ZF: Zero Flow (Set at entry 212)
33 HT: High Temperature
34 LT: Low Temperature
35 TP: Temperature Probe
36 HP: High Pressure
37 LP: Low Pressure
38 PR: Pressure Transducer
39 HD: High Density
40 LD: Low Density
41 DR: Density Transducer
42 BP: Back Pressure
43 LF: Low Flow
44 HF: High Flow
45 BH: Blend High
46 BL: Blend Low
47 OA: Overrun
48 PT: Pulse Transmission
49 VF: Valve Fault
50 PS: Pulse Security
51 ZF: Zero Flow
52 CF: Not Configured Flow
53 UF: Unwanted Flow
Note: 1. Alarms that have the statement "Set at entry ???" are programmable in their respective program codes as to whether they are
clearable or not clearable in the Run and Ready Mode of operation.
2.Alarms 1 through 32 are System Alarms, alarms 33 through 53 are Product alarms.
To Next Page
Loading...
