FMC Technologies AccuLoad II - Additive Injector Pulser No. 1 (__81)

Program
Code Function Code Description Entry
Program
Code
72 Issue/Rev. 03 (8/97)
__55 Recipe Correction Enter: Five digits as one whole number __55
Factor followed by four decimals
(e.g., 1.1000) __. __ __ __ __
__80 Clean Line Enter: "0" Not Used __80
Deduct "1" Product 1
"2" Product 2
"3" Product 3
"4" Product 4 __
__81 Additive Injector Enter: Three digits in whole units __81
Pulser No. 1 of delivered liquid per injector pulse
(e.g., 040) __ __ __
__82 Additive Injector Enter: Three digits in whole units __82
Pulser No. 2 of delivered liquid per injector pulse
(e.g., 040) __ __ __
__83 Additive Injector Enter: Three digits in whole units __83
Pulser No. 3 of delivered liquid per injector pulse
(e.g., 040) __ __ __
__84 Additive Injector Enter: Three digits in whole units __84
Pulser No. 4 of delivered liquid per injector pulse
(e.g., 040) __ __ __
__85 Additive Injector Enter: Three digits in whole units __85
Pulser No. 5 of delivered liquid per injector pulse
(e.g., 040) __ __ __
__86 Additive Injector Enter: Three digits in whole units __86
Pulser No. 6 of delivered liquid per injector pulse
(e.g., 040) __ __ __
__87 Additive Injector Enter: Three digits in whole units __87
Pulser No. 7 of delivered liquid per injector pulse
(e.g., 040) __ __ __
__88 Additive Injector Enter: Three digits in whole units __88
Pulser No. 8 of delivered liquid per injector pulse
(e.g., 040) __ __ __