FMC Technologies AccuLoad II - Low Pressure Alarm; High Pressure Alarm

Program
Code Function Code Description Prod 1 Prod 2 Prod 3 Prod 4
Issue/Rev. 0.3 (8/97) 61
500 Product Pressure Directory
501 Minimum Back Enter: Four digits to select
Pressure Flow the minimum flow rate allowed
Rate Setting during back pressure operation in
whole units per minute. (e.g., 0100)
"0000" disables the alarm _____ _____ _____ _____
502 Differential Pressure Enter: Three digits of differential
pressure in units of psia, bars, or
kg/cm
2
that is to be maintained above
the vapor pressure or back pressure
(e.g., 060). Unit selection is
made in code 541 of the Systems
Directory. ____ ____ ____ ____
503 Minimum Back Enter: Two digits in seconds
Pressure Flow Rate to achieve a desired flow rate
Timer Setting (e.g., 20).
"00" disables this minimum flow rate
timer and the back pressure reduction
in code 504. ___ ___ ___ ___
504 BP Reduction Enter: Two digits in % reduction of
flow rate for back pressure flow
control and AFO (e.g., 90) ___ ___ ___ ___
505 Low Pressure Alarm Enter: Four digits indicating
the pressure reading that will
generate a low pressure alarm.
The range is from 0000 to 9999.
Pressure units are dependent
on entry made in code 541
of the Systems Directory.
An entry of 0000 will disable
this feature. _____ _____ _____ _____
506 High Pressure Alarm Enter: Four digits indicating
the pressure reading that will
generate a high pressure alarm.
The range is from 0000 to 9999.
Pressure units are dependent
on entry made in code 541
of the Systems Directory.
An entry of 0000 will disable
this feature. _____ _____ _____ _____