FMC Technologies AccuLoad II - Ratio Adjustment Factor; System Volume Accuracy Directory; Transaction Control; Maximum Preset Volume

Program Program
Code Function Code Description Entry Code
28 Issue/Rev. 03 (8/97)
282 Clean Line Alarm Enter: Two digits in volume 282
Limit of under delivery of the
clean line volume allowed.
(e.g., 10) __ __
283 Ratio Adjustment Enter: Three digits in tenths to 283
Factor speed up response of blend values
(e.g., 20.0) __ __ . __
Note: This adjustment factor must not be set to 00.0.
284 Ratio Adjustment Enter: Two digits in seconds to set 284
Timer amount of time between ratio flow
adjustments.
(e.g., 01) __ __
Note: This adjustment must not be set to 00.
285-299 Unassigned at Present 285-299
300 System Volume Accuracy Directory 300
301 Transaction Control Enter: "0" Local Tray Switch 301
"1" Print Key
"2" Remote
"3" Master Reset __
302 Maximum Preset Enter: Five digits in whole units 302
Volume (e.g., up to 99,999 units)
"00000" disables option __ __ __ __ __
303 Minimum Preset Enter: Five digits in whole units 303
Volume (e.g., up to 99,999 units)
"00000" disables option __ __ __ __ __
304 Auto Preset Enter: Five digits in whole units 304
(e.g., 99,999 units)
"00000" disables option __ __ __ __ __