Program Program
Code Function Code Description Entry Code
Issue/Rev. 0.3 (8/97) 43
800 System Input/Output Directory 800
801 Additive Injector Stop Enter: "0" Additive stop at end 801
of batch (Option 1)
"1" Additive stop at programmed
stop volume with no recalculation
of Additive. (Option 2)
"2" Additive stop at programmed
stop volume with recalculation
of additive (Option 3) __
802 Additive Injector Enter: Three digits in whole units 802
Stop Volume of remaining system volume to
be loaded when the Additive Injectors
will be stopped (e.g., 75). __
803 Additive Injector Enter: "0" for Raw output 803
Output "1" for Gross output
"2" for Gst output
"3" for Net output __
804 Manual/Auto Enter: "0" for Auto Injectors 804
Additive Injector "1" for Manual Injectors
Selection when in the Standby Mode.
"2" for Manual Injectors
per transaction.
"3" for Manual Injectors
per batch. __
805 Restart After Enter: "0" Manual Valve Start 805
Valve Power "1" Auto Valve Start __
Restored
806 Valve Power Sense Enter: Up to 20 characters 806
Permissive Message for prompt message
(e.g., Permissive Not Met) _______________
To Next Page
Loading...
