Program Program
Code Function Code Description Entry Code
42 Issue/Rev. 03 (8/97)
759 Define Delivery Enter: Ten digits in the form of 759
Report four digits for the current line
(0000), three digits for the column
number that the data will start at
(000), and the item that will be
printed (000) on the delivery
report. Refer to Appendix II for
item numbers. (e.g., 0134, 016, 135)
__ __ __ __, __ __ __, __ __ __
Note: To delete information from the delivery report move to the entry number field by pressing "ENTER" and enter a zero and press "ENTER"
again.
Note: This code applies to RBU-01 and above firmware.
760-779 Unassigned at Present 760-779
780 Number of Prompts Enter: One digit between 0 and 5 780
representing the number of
prompts used in the Standby Mode (e.g., 4)
"0" disables prompts in the Standby Mode __
781 Print Transaction Enter: Three digit Transaction 781
Number to print the transaction
data desired. (e.g., 010 will
print the tenth transaction back
from the current transaction.) __ __ __
782 Prompts Printed Enter: "0" Standby Blank 782
"1" Standby Print
"2" Always Print __
783-789 Unassigned at Present 783-789
790 High-Security Enter: "0" No High-Security Programming 790
Communications through communications
Programming "1" High-Security Programming
through communications __
Note: High-Security Programming refers to the codes in the configuration directory and any codes in other directories that have a second digit of
nine.
791-799 Unassigned at Present 791-799
To Next Page
Loading...
Need help?
General
