To Next Page

To Previous Page

Program Program

Code Function Code Description Entry Code

26 Issue/Rev. 03 (8/97)

200 System Flow Control Directory 200

201 Low Flow Start Volume Enter: Four digits in whole 201

units (e.g., 0100) __ __ __ __

Note: The larger of the volumes as programmed in this code or calculated in code 202 will be used as the low flow start volume.

202 Low Flow Start Enter: Two digits in whole percentage 202

Percentage indicating the percentage of the preset

to be delivered during low flow start

(e.g., 10%) __ __

Note: The larger of the volumes as calculated using the percentage entered in this code or the volume entered in code 201 will be used as the low

flow start volume.

203 Low Flow Start Rate Enter: Four digits in whole 203

units per minute (e.g., 0150)

"0000" entry will not allow

the valve to open. __ __ __ __

204 Low Flow Start Enter: "0" Low Flow Start always after 204

zero flow.

"1" Low Flow Start at beginning

of batch only. ___

205 System First High Enter: Four digits in whole units 205

Flow Rate (e.g., 0600) "0000" Entry will not

allow the valve to open. __ __ __ __

206 System Second High Enter: Four digits in whole units 206

Flow Rate (e.g., 0300) "0000" Entry will not

allow the valve to open if configured

for 1st/2nd High Flow. __ __ __ __

207 Overrun Alarm Limit Enter: Two digits in whole 207

units (e.g., 15)

"00" disables the alarm __ __

208 Zero Flow Timer Enter: Two digits in seconds (e.g., 15) 208

"00" disables this option __ __

FMC Technologies AccuLoad II User Manual

Questions and Answers: