Program Program
Code Function Code Description Entry Code
Issue/Rev. 0.3 (8/97) 1
System Directories
000 System Configuration Directory 000
001 Number of Products Enter: "1" One Product 001
"2" Two Products
"3" Three Products
"4" Four Products __
002 Number of Additive Enter: "0" No Additive Injectors 002
Injectors "1" One Additive Injector
"2" Two Additive Injectors
"3" Three Additive Injectors
"4" Four Additive Injectors
"5" Five Additive Injectors
"6" Six Additive Injectors
"7" Seven Additive Injectors
"8" Eight Additive Injectors __
003 A/C Output Relay 1 Enter: "00" No Assignment (N/A) 003
Terminals 89 & 90 "01" Additive Relay 1 (ADD1)
"02" Additive Relay 2 (ADD2)
"03" Additive Relay 3 (ADD3)
"04" Additive Relay 4 (ADD4)
"05" Additive Relay 5 (ADD5)
"06" Additive Relay 6 (ADD6)
"07" Additive Relay 7 (ADD7)
"08" Additive Relay 8 (ADD8)
"09" Additive Pump 1 (ADP1)
"10" Additive Pump 2 (ADP2)
"11" Additive Pump 3 (ADP3)
"12" Additive Pump 4 (ADP4)
"13" Additive Pump 5 (ADP5)
"14" Additive Pump 6 (ADP6)
"15" Additive Pump 7 (ADP7)
"16" Additive Pump 8 (ADP8)
"17" Alarm Relay (ALR) __ __
Note: When using three or four products this relay must be programmed "00" (No Assignment).
To Next Page
Loading...
