FMC Technologies AccuLoad II - High Density Alarm

To Next Page

To Previous Page

Program

Code

Function

Code Description Prod 1

Prod 2 Prod 3 Prod 4

60 Issue/Rev. 03 (8/97)

444 High Temperature Enter: Four digits. The

Alarm first digit indicates polarity.

First digit "0" = Positive

First digit "1" = Negative

The last three digits

indicate temperature in whole

degrees. (e.g., 0250 = + 250)

Temperature units are dependent

on entry made in code 441

An entry of 0999 (+999) will

disable this feature. _____ _____ _____ _____

445 Maintenance Temperature Enter: Five digits. The

first digit indicates polarity.

First digit "0" = Positive

First digit "1" = Negative

The last four digits

indicate temperature in tenths

of degrees. An entry of -999.9

will disable this feature.

(e.g., 0085.0 = + 85.0) _____._ _____._ _____._ _____._

446 Temperature Offset Enter: Three digits. First digit

must be "0" or "1" (0 = positive,

1 = negative). Second and third

digits represent the offset temperature

in tenth degrees (e.g., 10.5 entered

will display at -0.5 degrees offset) __ __.__ __ __.__ __ __.__ __ __.__

447 Low Density Alarm Enter: Four digits. The

range is from 0000 to 9999.

Density units are dependent

on entry made in code 445

of the Systems Directory

An entry of 0000 will disable

this feature. _____ _____ _____ _____

448 High Density Alarm Enter: Four digits. The