FMC Technologies AccuLoad II User Manual

Program Program
Code Function Code Description Entry Code
18 Issue/Rev. 03 (8/97)
040 Additive Injector Enter: Four digit number indicating 040
#4 Plumbing the products that this additive
injector is plumbed into.
1st digit - Product #1
2nd digit - Product #2
3rd digit - Product #3
4th digit - Product #4
A zero in the digit indicates
that the injector is not plumbed
into that product, a one indicates
that the injector is plumbed
into that product. (e.g., 1110
indicates that the injector is
plumbed into products 1, 2,and 3.) __ __ __ __
Note: If that additive injector output is configured for use and this entry is "0000" the indication is that it is plumbed into the loading arm
downstream
of the metering system.
041 Additive Injector Enter: Four digit number indicating 041
#5 Plumbing the products that this additive
injector is plumbed into.
1st digit - Product #1
2nd digit - Product #2
3rd digit - Product #3
4th digit - Product #4
A zero in the digit indicates
that the injector is not plumbed
into that product, a one indicates
that the injector is plumbed
into that product. (e.g., 1110
indicates that the injector is
plumbed into products 1, 2,and 3.) __ __ __ __
Note: If that additive injector output is configured for use and this entry is "0000" the indication is that it is plumbed into the loading arm
downstream
of the metering system.

FMC Technologies AccuLoad II Specifications

General

Brand	FMC Technologies
Model	AccuLoad II
Category	Controller
Language	English