FMC Technologies AccuLoad II - Page 56

Program Program
Code Function Code Description Entry Code
Issue/Rev. 0.3 (8/97) 51
909 Diagnostic AccuLoad II Model Number Read Only 909
910 Diagnostic ACM Model Number Read Only 910
911 Diagnostic System Messages Read Only 911
912 Diagnostic Calibration Event Counter None 912
Note: This code applies to RBU-10 and above firmware.
913 Diagnostic Configuration Event Counter None 913
Note: This code applies to RBU-10 and above firmware.
914-939 Unassigned at Present 914-939
940 Protection of Program Enter: "0" for Weights and Measures Mode 940
Codes 980-989 "1" for Program Mode __
941 Diagnostic Communication Test - EIA-232 None 941
No Echo Back
942 Diagnostic Communication Test - EIA-232 None 942
With Echo
943 Diagnostic Communication Test - EIA-485 None 943
No Echo Back
944 Diagnostic Communication Test - EIA-485 None 944
With Echo
945 Diagnostic Meter Pulse Channel 1 Active None 945
946 Diagnostic Meter Pulse Channel 1 Contact None 946
947 Diagnostic Meter Pulse Channel 2 Active None 947