FMC Technologies Sening EPE2 - Page 2

EPE2-Controller for Meter Draining System
EPE2
Installation Manual
Sening®
Innovative Tank Truck Systems
ii von iv Rev. 1.03 / JS / jp / March 2010 MN F08 003 US / DOK-450E
ii
Further documentation on this product:
Description Order no.
GMVT 805 operating and installation instructions DOK-397E
EPE2-Controller for Meter Draining System
Service Instructions
DOK-512E
History
Revision Date Editor Status Description
Rev. 1.00 February 2006 JS Release Basic edition
Rev. 1.01 August 2006 JP Release
- new formatting / illustrations
- editorial changes
Rev. 1.02 April 2009 / JS / jp / Release
Minor changes:
- Table 1: DIP switch S1 settings
- Figure 4: Connection label in the device cover
- Drawing 61.351684 / - Drawing 61.351994
- Chapter: special service settings removed
- Appendix: “HyperTerminal“ terminal program settings
removed
Rev. 1.03 March 2010 / JS / jp / Release
Minor changes:
- Figure 5: Connection label in the device cover
- DIP switch S1 settings (from MID version 3.50)
- Figure 3: Schematic structure “Stand-Alone“
- Figure 4: Schematic structure “with MultiFlow”
- Chapter 3.1.1 Text corrections
- New Chapter 3.7 “Parameters in the MultiFlow”
- New Chapter 3.8 “Diagnose in the MultiFlow”
Important note
All explanations and technical details given in this documentation have been produced and
edited by the author with the greatest care. However the possibility of errors cannot be com-
pletely eliminated. We are always very grateful for notification of any errors found.