FMUSER INTERNATIONAL GROUP INC. 广州市汉婷生物技术开发有限公司
38
PSW
PS Window
Returns actual Program Service name that is being sent by the RDS encoder. The value returned is an output
of internal real-time RDS decoder so it’s affected also by Dynamic PS and user defined groups.
PSW
RTP
Radiotext Plus Tagging Data
(00-31; 00-31; 00-31; 00-31; 00-31; 00-15)
Six 2-digit decimal numbers of RT+ tagging data in this order:
Tag 1 type, tag 1 start, tag 1 length, tag 2 type, tag 2 start, tag 2 length.
Start marker 00 means the first character in the Radiotext. Length marker gives the number of
characters following the first character at the start position.
The tagging data must be associated with actual Radiotext 1.
The tagging data are transmitted as groups 3A (RT+ ODA AID) and 11A (RT+ Tagging Data).
On each enter of the tagging data internal Toggle bit automatically changes its state from 0 to 1 or from 1 to 0.
First entering of the tagging data automatically enables the internal RT+ feature until power off or reset.
The RT+ is active only if symbol ‘R’ is present in the Group sequence.
If both tag 1 type and tag 2 type are set to 00, internal RT+ running bit is temporarily hold low until at least one
valid tag type is entered.
RT1=Now playing: Novaspace – Time After Time
RTP=04,13,08,01,25,14
RTPRUN
Radiotext Plus Running Bit
(0, 1, 2)
0 - Bit set low (RT1 no longer contains RT+ data), automatically set to 1 on next RTP=
entry. 1 - Bit set high (actual RT1 contains RT+ data)
2 - Disable internal RT+ feature
This command is not required for common use since the running bit is set automatically.
RTPRUN=1
SHORTRT
Short Radiotext
(0, 1)
If enabled (1), all new inserted Radiotexts shorter than 60 characters will be followed by Carriage Return and the
remaining spaces will be cut. Default value is 0.
SHORTRT=1
SITE
UECP Site Address
(0-255)
Assigns a site address to the RDS encoder that is used only for UECP. A value of 0 means that any site
address can apply. See chapter 13 for more details.
*SITE=2
UDG1
User Defined Groups 1
Specifies up to 8 groups in BBBBCCCCDDDD format, which are repeatedly transmitted in sequence by the RDS
Specifies up to 8 groups in BBBBCCCCDDDD format, which are repeatedly transmitted in sequence by the
RDS encoder. BBBB, CCCC and DDDD represent the contents of the block 2, block 3 and block 4 in
hexadecimal expression. For more details about the group coding see section 14.2.
When entering new group(s), previous groups are removed from the UDG2 buffer.
To Next Page
Loading...