*
#
4
#
2
#
0
3
21
0
5
4
2
0
#
Enter 3 digit number from 0-255, add 0 if less than 3 digit.
Enter password
*
Enter password
#
4
#
3
#
0
3
2
1
0
5
4
2
0
#
Enter 3 digit number from 0-255, add 0 if less than 3 digit.
6.4.3 Set exit delay
After user armed the system, it is convenient for user to exit the area after
arm successfully.( the default setting is 10seconds)
For example: Set exit delay time is 20s
Note: Entry delay is just effective for delay zone. Other zone types can t
enter delay.
#
4
#
4
#
3
2
1
0
5
4
1
0
#
*
User manual
6.4.2 Set entry delay
When trigger alarm, the panel will give delay alarm time(default setting is 10s)
For example: Set entry delay to 20seconds
Press[*] for 3 seconds
Please enter entry
delay time, press
confirm key to save,
press back key to exit
Press[*] for 3 seconds
Please enter exit
delay time, press
confirm key to save,
press back key to exit
6.4.4 Set siren time :The siren ring time after alarm is triggered( the default
setting is 5 minutes)
For example: Set siren time is 10 minutes
Please enter 0 to 30
minutes siren time, press
confirm key to save, press
back key to exit
Press[*] for 3 seconds
Enter password
6.4.5 Set ring times
User remote control alarm panel, dail the preset phone number, the panel will
off-hook after phone ring times( the default setting is 7 times)
For example: Set ring times is 5
18
To Next Page
Loading...
Need help?
General