The control pane can power 15V, 100mA to detectors. The max curent
is 100mA. Do not exceed 100mA, otherwise please use extra power
supply.
2.3.2
3.1 About panel
5
User manual
To arm the panel. The zone number will be also display on the LCD
screen. At this time arm system is not allowed unless you force arm.
2.4 Intall wereless detector
2.4.1 As the detector`s manual says,install coded detector in the area 150m
from the control panel.Please test and make sure detector can work with
control panel normally.
2.4.2 Wireless repeater function:when wireless detector is too far from the
panel or some occluders between panel and detector which disable the
panel receivethe signal from wireless detector.Now you can choose our
made wireless repeater to achieve wireless signal relay trans mitting.
Arm
Disarm Alarm
LCD screen
Fault
Chapter 3 Keybad and Operation
Stay/on turn key
Intercom/monitor hole
Protection
/return button
Event query
/under turn key
Key machine
A light hole
Set the
keys
Enter
key
To Next Page
Loading...
Need help?
General