#
4
#
5
#
3
21
0
5
4
0
5
#
*
Note: The max. Ring times as per the local communication, if set 0, not
off-hook.
#
4
#
6
#
3
21
0
5
4
0
8
#
*
#
4
#
7
#
3
2
1
0
5
4
1
#
*
User manual
Enter password.... Please enter ring
times, if set as 0, the phone will not
off hook, press confirm key to save,
press back key to exit
Press[*] for 3 seconds
Enter password
Enter 2 digit number from 0-15, add 0 if lower than 10.
6.4.6 Set detector loss inspection
The alarm panel will inspect the detectors status or alarm info in this time
interval, if not receive, it is determined that the detector is loss, the general
setting is not less than 6 hours( the default setting is 0, disable this function)
For example: Set detector loss inspection time is 8 hours.
Please enter 0 to 99 hours detector
loss inspection time, 0 for disable,
press confirm key to save, press
back key to exit
Press[*] for 3 seconds
Enter password
6.4.7 Set arm/disarm tone
When user arm/disarm the system through remote control, if siren will sound
or not for prompting.( the default setting is disabled)
For example: Set siren with short sound when arm/disarm through remote control.
Please choose arm/disarm
tone: 1. siren short sound
2. no voice, press confirm
key to save, press back key
to exit
Press[*] for 3 seconds
Enter password
19
To Next Page
Loading...
Need help?
General