User manual
6.6.1 Set zone attribution 28
6.6.2 Set zone siren type 28
6.6.3 Set wired zone loop type 28
29
6.6.4 Set wired zone response speed
6.6.5 Set related zone
29
6.7 System maintance 30
6.7.1 Set timing operation 31
6.7.2 Recording 31
6.7.3 Play recording 31
6.7.4 Set programmable output port 31
6.7.6 Restore to factory default 32
6.7.5 Delete system events 32
6.8 Set GSM module 32
6.9 Advanced setting options 34
6.9.2 Set sever IP address 35
6.9.1 GPRS enable and disable
35
6.9.3 Set sever port 36
6.9.4 Set user ID 36
6.9.5 Set user password 36
6.9.6 GSM SMS language 36
6.9.7 Delay zone tone source options 37
6.9.8 Handshake tone input signal intensity 37
6.9.9 DTMF output signal intensity 37
6.9.10 Set LCD standby brightness 37
6.9.11 Alarm event retain time 38
Chapter VII technical specification 39
7.1 General data 39
7.2 Physical performance 39
Chapter VIII maintenance 40
8.1 Regular test 40
8.2 The cleanliness of control main machine 40
Chapter VX limitation of the products 40
To Next Page
Loading...
Need help?
General