3
User manual
26 The tampering alarm: cut the cable between wired detectors and the panel
will trigger larm, the telephone line cut will autom atically trigger siren alarm.
When someone deliberately dismantled the panel, it will alarm when
triggering tamper switch at the back of the panel.
27 Timing arm/disarm:Enable set 4 group time arm/disarm time.
28 CMS communications test: The panel will send a message to CMS at the
pre-set time interval to inspect the communicaiton if normal.
29 Siren options:Built-in siren, external wired siren, Wirelss siren. All sirens
can be programmed as enabled/disbale when alarms.
30 The voice speaker volume adjustment: adjust the volume by a rotary
switch on the panel.
31 Wireless repeater function:can extend the distance between the detector
and the panel by adding a wireless repeater of our company.
32 The wireless detector low battery prompted:Detectors will send status
report to the panel every 1-3 hours, the corresponding zone number and
the battery voltage symbol will be displayed on the LCD screen and also
will report to CMS.
To Next Page
Loading...
Need help?
General