Press "ENTER" key to continue.
ACTION REQUIRED:
DIGITAL DISPLAY:
1 DISPLAY FORMAT
QUESTIONS ? Help Hotline: 1-800-893-6723
W.16
File: T4\NEW O&M 2007\W16 WIZ NEW PR328 SETUP1.tcw
03/21/08 MT
SETUP MENU
DISPL FORMAT
1
SELECT FORMAT
SINGL DUAL
Step 1
Step 2
2 CHANNEL ID
SETUP MENU
# CHANNEL ID #
2
Step 1
#1 CHANNEL ID#
Step 2
Press "ENTER" key to continue.
NUMBER = 1
AUTO SCAN ?
NO YES
Step 3
ALTERNATING TIME
SECONDS = 6
Step 4
Configures how many channels are displayed simultaneously,
and whether the auto scan is engaged.
Choose a single channel to be displayed, or 2 channels to be
displayed if a multichannel indicator is being used.
Use “MENU” arrow keys to select. If “YES” is selected, the
Wizard will automatically scan all the channels in the Wizard
without the operator having to touch any keys. Display Format
menu is exited if “NO” is selected.
llows you to set the scan time period in seconds from one
channel to the next.
If there are multiple Wizard controllers on a single site, this
function allows you to assign an Identification Number from 1-
99 for each channel.
Use the numeric keypad to enter any number from 1 to 99.
3 100 PERCENT
SETUP MENU
100 PERCENT
3
Step 1
#1 100 PERCENT
Step 2
Press "ENTER" key to continue.
GAL = 400.00
llows you to tell the Wizard what value you consider 100% full.
This will calibrate the BAR GRAPH and PERCENT function for
the “Display Select” key.
Enter value that you consider 100% full.
MENUS
USER
SETUP
You may scroll through these items with the "MENU" arrow keys, or simply
enter the Menu Item Number to jump straight to that menu item.
SYSTEM ADDRESS
Step 3
NUMBER = XXX
Set MODBUS device address (1 to 247)
*Only visible if OPTIONAL MODBUS Serial Communication enabled.
MENU Arrow Keys: There are 2 menus that may be accessed via the "MENU" keys. The
"USER" Menu and the "SETUP" Menu. The "USER" Menu has 8 menu items and these are
functions that are used for day-to-day operations
The "SETUP" Menu has 17 menu items, and these are
functions that are used during equipment startup,
or if your chemical feed operation has been changed.
To Next Page
Loading...