2430 Stanwell Dr, Concord, CA 94520 USA
1-800-893-6723 US & Canada, Fax: 925-686-6713
www.forceflow.com / info@forceflow.com
Drawing Number
File: T4\NEW O&M 2007\W8 WIZ NEW INTRINSIC WIZ SOLO.tcw
30774
HAZARDOUS LOCATIONS
NON-HAZARDOUS LOCATION
CONDUIT MUST BE
SEALED PER
ELECTRICAL CODE
ELECTRONIC
LOAD CELL
WALL
LOAD CELL
CABLE
Allows refilling of tanks. To maintain accur ate usage dat a,
DO NOT fill tanks unt il STEP 3.
Press TANK LOAD button
Press 1 2 3 or 4 to select which scale, then press ENTER.
Fill your tanks now ! Then press ENTER
Toggles through display options:
Net Remaining, Amount Used, Average
Feed Rate , Days Until Empty, Daily Usage
Toggles through display for the totals
of all scales
1
2
3
SAFETY BARRIER
(IF REQUIRED)
FOR HAZARDOUS LOCATIONS, VERIFY ELECTRONIC LOAD CELL(S)
FURNISHED WITH YOUR SCALE HAVE THE FOLLOWING LABEL TO
MEET SAFETY REQUIREMENTS:
FOR FURTHER TECHNICAL INFORMATION OR FOR APPLICATIONS
ENGINEERING ASSISTANCE, PLEASE CONTACT FORCE FLOW
AT FORCE FLOW AT 925-686-6700; info@forceflow.com OR
1-800-893-6723.
HAZARDOUS LOCATION
INDICATOR IS NOT APPROVED FOR USE IN HAZARDOUS LOCATIONS.
IF YOUR INSTALLATION CONSTITUTES AN EXPLOSIVE OR COMBUSTIBLE
ENVIRONMENT, PLEASE CONSULT FACTORY FOR SAFETY PRECAUTIONS.
W.8
To Next Page
Loading...