ACTION REQUIRED:
DIGITAL DISPLAY:
SETUP MENU continued...
QUESTIONS ? Help Hotline: 1-800-893-6723
W.21
File: T4\NEW O&M 2007\W21 WIZ NEW PR328 SETUP6.tcw
12 ALARM/RLY CONFIG continued...
Step 2
SETUP MENU
USER PRIVILEGES
Step 1
13 USER PRIVILEGES
CHANGE PASSWORD
Step 3
USER PASSWORD
NUMBER = 1234
Press “ENTER” key to continue.
13
This function allows you to establish or change your password,
and to password various keys and menu items to prevent
unauthorized use.
NO YES
Choose YES if you would like to change the Password (or see
what it currently is).
Establish new 4 digit password and press enter.
Step 4
TANK LOAD
PASSWRD NO YES
Step 2
SETUP MENU
DIAGNOSTICS
Step 1
14 DIAGNOSTICS
VIEW/SET FACTORS
Press “ENTER” key to continue.
13
NO YES
SELECT CHANNEL
, enter CH #1
Step 3
Continued...
Step 4
#1 SP A HIGH
DISPLAY NO YES
Choose YES if you would like your alarm condition to be
displayed on the LCD screen. Choose NO if you don’t.
This function is used for trouble shooting, and is usually
used by a factory trained technician. Contact a Force
Flow technician at 800-893-6723 (or fax 925-686-6713)
to interpret this information.,
Choose "YES" to view calibration data.
Use "MENU" arrow keys to select channel.
Choose YES if you would like to password this item. Press
"ENTER" key to continue to scroll through menu choices.
"DEL" key to get back to the Setup Menu.
Step 5
SENSOR ALARM
DISPLAY NO YES
Step 6
INVERT RELAYS
NO YES
Displays an alarm if load cell or sensor fails.
Changes relay logic for relays 1 through 4 to "FAIL-SAFE".
If "YES", relays active (red light on module turned on ) in
NORMAL condition, de-activated in ALARM conditions or
when power interrupted.
To Next Page
Loading...