Features
177
[FV28100( X)10/89]
Folding Rear Seat
[FV28201( X)11/89]
2 door models
[FV28301( X)10/89]
To fold down the rear split seat:
[FV28401( X)05/95]
Rotate the head restraint fully forward. Lower the head restraint
to the top of the seatback. Pull upward on the latch release
handle at the side of the seatback, while pulling the seatback
forward with the other hand. Push the seatback downward until
the latch engages in the full down position.
[FV28601( X)05/95]
To return the system to the seating position, pull upward on the
latch release handle while rotating the seat upward until seat
back latches in the upright position.
[FV28701( X)11/89]
The inboard safety belt buckle will not be damaged by this
operation. The buckles will automatically return to original
position when seat is upright.
[FV28801( X)10/94]
10-1/2 pica art:0020226-F
Folding rear seat (two door model)
[FV28901( X)11/89]
4 door models
[FV28902( X)06/95]
NOTE: If your vehicle is equipped with a built-in child seat,
the seatback cannot be folded down unless the
built-in child seat is fully stowed.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
To Next Page
Loading...
Need help?
General
