18
[SR03800(ALL)06/95]
10-1/2 pica
art:0021301-A
Unfastening the outboard lap/shoulder belts
[SR03900( X)05/91]
The rear seat shoulder safety belts have a feature which allows
the seat belt webbing to be stowed out of the way when the
rear seats are folded down (2 door only). To stow the belt while
the seat is folded, attach the plastic snap on the seat belt to the
metal mating part on the plastic trim panel. This will keep the
belt out of the way while the seats are folded. Once the rear
seats have been returned to their upright position, unsnap the
belt from the trim panel.
[SR04000( X)05/95]
RWARNING
The rear seat belt snap must be detached from the trim
panel prior to wearing the belt.
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996
To Next Page
Loading...
