Fold the seats back down until they
engage.
Raise the seatbacks. See Folding the
seatbacks up.
Install the rear safety belts in the belt
guides on the outboard seatbacks.
Removing the seats
WARNING
The rear seats are heavy. To avoid
injury, take care when lifting the
seats.
Note: To increase the space in the luggage
compartment, the rear seats can be
removed completely.
1. Fold the seat forward. See Folding the
seats forward.
2. Fold the seat up to an angle of
approximately 45 degrees to the floor.
3. Push down both red levers to open the
locking mechanism.
4. Remove the seat.
Installing the seats
WARNINGS
To avoid injury, take care when
folding the seats down.
Make sure that the locking hole on
the floor is clear of sand, rock or any
objects which may prevent the seat
from locking.
Note: Make sure the locking mechanism is
fully open.
112
C-MAX (CB7)
Seats
To Next Page
Loading...
Need help?
General
