3. Briefly press the button.
Starting a diesel engine
Note: Engine cranking may not commence
until the engine glow plug cycle has been
completed. This may take several seconds
in extremely cold conditions.
Note: Continue to press the clutch or brake
pedal until engine cranking begins.
Failure to start
The passive starting system will not
function if:
• The passive key frequencies are
jammed.
• The passive key battery is flat.
If you are unable to start your vehicle carry
out the following procedure.
1. Carefully prise out the cover.
2. Insert the key into the key holder.
3. With the key in this position you can
press the button to switch the ignition
on and start your vehicle.
Stopping the engine with the
vehicle stationary
Note: The ignition, all electrical circuits,
warning lamps and indicators will be
switched off.
Manual transmission
Briefly press the button.
Automatic transmission
1. Move the transmission selector lever
to position P.
2. Briefly press the button.
126
C-MAX (CB7)
Starting and Stopping the Engine
To Next Page
Loading...
Need help?
General
