TECHNICAL SPECIFICATIONS
Vehicle fluids
CAUTION
Do not use fluids which do not meet the specifications or requirements defined. Use
of unsuitable fluids may lead to damage which is not covered by your Warranty.
Recommended fluid
Viscosity
Grade
SpecificationItem
Castrol or Ford Engine Oil5W-20WSS-M2C948-B
Engine oil - gasoline
engines only
Castrol or Ford Engine Oil5W-30WSS-M2C913-C
Alternative engine oil
- all gasoline engines
except 1.0L EcoBoost
Castrol or Ford Engine Oil5W-30WSS-M2C913-C
Engine oil - diesel
engines
Motorcraft SuperPlus Anti-
freeze
-WSS-M97B44-DAntifreeze
Motorcraft or Ford DOT 4
LV High Performance
Brake Fluid
-WSS-M6C65-A2Brake fluid
Your engine has been designed to be used with Castrol and Ford Engine Oil, which gives
a fuel economy benefit whilst maintaining the durability of your engine.
Topping up the oil: If you are unable to find an oil that meets the specification defined
by WSS-M2C913-C or WSS-M2C948-B (gasoline engines only), you must use SAE
5W-30 that meets the specification defined by ACEA A5/B5.
Using topping up oils other than the one specified can result in longer engine cranking
periods, reduced engine performance, reduced fuel economy and increased emission
levels.
Castrol engine oil recommended.
197
C-MAX (CB7)
Maintenance
To Next Page
Loading...
Need help?
General
