Note: The windshield wiper blades are
different in length. See Technical
Specifications (page 52). If you install
wiper blades of the wrong length, the rain
sensor may not work correctly.
Service position
Switch off the ignition and move the wiper
lever to position A within three seconds.
Release the lever when the windshield
wipers have moved to the service position.
Changing the windshield wiper blades
Set the windshield wipers in the service
position and lift the wiper arms.
1. Press the locking buttons together.
2. Rotate and remove the wiper blade.
Note: Make sure that the wiper blade locks
into place.
3. Install in the reverse order.
Rear window wiper blade
1. Lift the wiper arm.
2. Slightly rotate the wiper blade from the
wiper arm.
3. Disengage the wiper blade from the
wiper arm.
4. Remove the wiper blade.
Note: Make sure that the wiper blade locks
into place.
5. Install in the reverse order.
51
C-MAX (CB7)
Wipers and Washers
To Next Page
Loading...
Need help?
General
