EasyManuals Logo

Ford C-MAX User Manual

Ford C-MAX
316 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #218 background imageLoading...
Page #218 background image
Tire Pressure Monitoring System
Reset Procedure
Overview
You must carry out the system reset
procedure after each tire replacement or
adjustment of the tire pressures.
To maintain your vehicle load carrying
capability, your vehicle requires different
tire pressures in the front tires compared
to the rear tires. The system will illuminate
the warning lamp at different pressures for
the front and rear tires.
The tires need to be periodically rotated
to provide consistent performance and
maximum tire life, the system needs to
know when the tires have been rotated to
determine which set of tires are on the
front and rear axles. With this information,
the system can detect and correctly warn
of low tire pressures.
Carrying Out the System Reset
Procedure
1. Switch the ignition on.
2. Using the information display control,
navigate to Menu, Vehicle settings,
Driver assist, Tyre Monitor.
3. Press and hold the OK button until
confirmation appears.
Alternatively, if your vehicle has a tire
pressure monitoring system reset button,
press and hold the button until
confirmation appears.
How Temperature Affects the Tire
Pressures
While driving in a normal manner, tire
pressures may increase up to 0.3 bar (4
psi) from a cold start situation. If the
vehicle is stationary overnight and the
temperature significantly lower than the
daytime temperature, tire pressures may
decrease up to 0.2 bar (3 psi) for a drop of
17°C (30°F) in ambient temperature. The
system detects this lower pressure value
as being significantly lower than the
correct inflation pressure, and the warning
lamp illuminates.
When Inflating the Tires
When inflating the tires the system may
not respond immediately to the air added
to the tires.
If the warning lamp is on:
1. Check each tire to verify that none are
flat.
2. If one or more tires are flat, repair as
necessary.
3. Check the tire pressures and inflate all
the tires to the correct pressure.
4. Carry out the tire pressure monitoring
system reset procedure.
TECHNICAL SPECIFICATIONS
Lug nut torque
Nm (Ib-ft)Wheel type
135 (100)All
216
C-MAX (CB7)
Wheels and Tires

Table of Contents

Other manuals for Ford C-MAX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ford C-MAX and is the answer not in the manual?

Ford C-MAX Specifications

General IconGeneral
BrandFord
ModelC-MAX
CategoryAutomobile
LanguageEnglish

Related product manuals