When You Believe the System is Not
Operating Correctly
The main function of the system is to warn
you when the tire pressures are low. It can
also warn you in the event the system is
no longer capable of operating correctly.
See the following chart for information
concerning the system:
Action requiredPossible causeLow tire pressure
warning lamp
1. Make sure tires are at the correct pres-
sure. See When Inflating the Tires in
this chapter.
Tire(s) under-inflatedSolid warning lamp
2. After inflating the tires to the correct
pressure you must carry out the tire
pressure monitoring system reset
procedure. The tire pressures are also on
the tire inflation pressure label (located
on the edge of driver door or the B-Pillar).
Repair the damaged road wheel and tire
assembly and refit it to your vehicle to
restore correct system function. For a
description on how the system functions,
see When the Temporary Spare Tire
is Installed in this section.
Spare tire in use
If the tires are correctly inflated and the
spare tire is not in use but the light
remains on, have your vehicle checked
by an authorized dealer as soon as
possible.
Tire pressure monitoring
system malfunction
Repair the damaged road wheel and tire
assembly and refit it to your vehicle to
restore correct system function. For a
description on how the system functions,
see When the Temporary Spare Tire
is Installed in this section.
Spare tire in useFlashing warning
lamp
If the tires are correctly inflated and the
spare tire is not in use but the light
remains on, have your vehicle checked
by an authorized dealer as soon as
possible.
Tire pressure monitoring
system malfunction
215
C-MAX (CB7)
Wheels and Tires
To Next Page
Loading...
Need help?
General
