When in use, the rear safety belts should
be placed in the belt guides on the
outboard seatbacks.
Second row center safety belt
The retractor for the rear center safety belt
is located in the roof.
To fasten the safety belt:
1. Pull the belt out steadily. It may lock if
you pull it sharply or if the vehicle is on
a slope.
2. Insert the smaller tongue into the black
buckle to the left of the center seat.
3. Pull the larger tongue across the lap
and insert it into the buckle to the right
of the center seat.
Note: If in constant use, you can leave the
belt buckled in the black buckle. When it is
not in use, or when you fold or move the rear
seats, you should release the belt from the
black buckle.
Press the red button on the right buckle to
release the belt. Let it retract.
Press the button on the side of the black
buckle to release the belt. Let it retract
completely and smoothly to the retractor
in the roof.
Stow the larger tongue flat against the roof
trim.
29
C-MAX (CB7)
Occupant protection
To Next Page
Loading...
Need help?
General
