Press the red button on the right buckle to
release the belt. Let it retract.
Unclip the spring hook to release the belt.
Let it retract completely and smoothly to
the retractor in the roof.
Stow the tongue securely flat against the
roof trim.
WARNING
Always replace the rubber cover
when stowing the belt assembly.
Third row seat belts
Note: When not in use, place the safety
belts in the clips on the outboard trim. Make
sure that the safety belt tongue is positioned
above the clip.
31
C-MAX (CB7)
Occupant protection
To Next Page
Loading...
Need help?
General
