Page 22
5.1 Debris Screen
5.2 Engine Maintenance
Please refer to the engine manual supplied with this machine for the following:
• Checking the engine oil.
• Changing the engine oil, oil filter and fuel filter.
5.3 Fastener tightening torques
All machine fastener torques should be regularly checked to the above table. In
particular, those for the flywheel blades, flywheel bearings, axle assembly, hitch,
road wheels and engine mounts.
1. Remove the 6 x M8 nuts & bolts and remove the screen
2. Brush off any debris from both sides of the screen
3. Brush off any debris from the radiator
4. Replace screen with 6 x M8 nuts & bolts
To Next Page
Loading...
