Summary System Configurations
License Status :
This field is visible only when the model is FortiWAN-VM. This field
displays the status of a FortiWAN-VM license as follows:
Trial License is in use. (Expire in x days x hours x mins): This is a
trail or evaluation license.
Valid: This is a permanent license.
Expired: This license is expired.
Click Update button and upload your FortiWAN-VM license file to
update your FortiWAN-VM appliance. You can request a evaluation
or trial license from Fortinet Customer Support or you can purchase
a permanent license from your Fortinet channel partner.
Peer Information
Version : The firmware version of the slave.
Model/Max Bandwidth : The model of the slave and the bandwidth capability that the model sup-
ports. For deployment of FortiWAN-VM, only the model of the slave is
displayed here, no Max Bandwidth and Total RAM.
Serial Number : The serial number of the slave.
Uptime : The time the slave has been up and running.
State :
Normally, this field displays “Slave”.
During the procedure of reboot, this field displays "Rebooting".
System panic happens, this field displays "Panic".
Peer unit is lost (power-off or Ethernet cable disconnected), this
field displays "None".
Firmware version, FortiWAN model or throughput license is
inconsistent with the local unit, this field displays "Incompatible".
Note1: Connections may exceed 100 when FortiWAN is started, but will return to normal in a while. This happens
because FortiWAN sends out ICMP packets to test the network.
Note2: Once HA becomes active, settings of master unit will be synchronized to slave unit automatically.
WAN Link State
[WAN Link State] shows you the number of WAN links enabled and their current status. The number of WAN links
available for each FortiWAN may vary depending on models. In [WAN Link State], each WAN link is color-coded to
indicate its status. See the color-coding scheme below:
l Green: Active WAN link
l Blue: Backup WAN link
FortiWAN Handbook
Fortinet Technologies Inc.
95
To Next Page
Loading...
