31
Delays - Entry & Exit Delay
e Delay Menu
In the Delay Menu, you can specify a system-wide Entry
Delay, and a system-wide Exit Delay. ese apply to all of
the accessories in your system, in all Zones.
An Entry Delay will begin counting down if a sensor is trig-
gered. is gives you time to walk to the main panel and
disarm the system aer entering your house, for example.
An Exit Delay will begin counting down aer you arm the
system in Away Armed mode. is gives you time to leave
the house before the system is fully armed.
Main Menu -> System -> Delay
If you don’t want to set a system-wide Entry Delay for all
sensors, you can set an Entry Delay for individual sensors,
instead. at way, only certain sensors will have a delay
programmed (such as the front door), while all other sen-
sors will still trigger the alarm immediately (such as win-
dow sensors).
(see the pictures on the next page)
To Next Page
Loading...
Need help?
General
