45
Secondary RFID Keypad
If you have an RFID Keypad with your system, you can use
that to arm and disarm the system as well. Additionally,
you can swipe the RFID Key Tags in front of the Keypad to
disarm the system.
e Secondary RFID Keypad also comes with
2 additional Key Tags.
Changing the RFID Keypad’s Passwords
e RFID Keypad has two passwords which are separate
from the password in your Main Panel.
Default Admin Password (change settings): 123456
Default User Password (disarm system): 1234
Note: e User Password does not need to match the Main
Panel’s password for the Keypad to work correctly.
To change the Admin Password, enter the following on the
Keypad:
[Current 6-Digit Admin Password] #
8 [New 6-Digit Admin Password] #
To change the User Password:
[Current 6-Digit Admin Password] #
7 [New 4-Digit User Password] #
To Next Page
Loading...
Need help?
General
