Fortress Technologies S6 Titan User Manual

59
Performing a Factory Reset
Some rare issues may be resolved by performing a factory
reset in the main panel, then reprogramming the system
and testing again.
Main Menu -> Security -> Restore Factory Defaults
Performing a factory reset
Checking Placement of Sensors
If one or more sensors is not working consistently or cor-
rectly, or if you are receiving frequent false alarms, you
may need to check the placement of the sensors to make
sure they are oriented correctly for best performance.
• Separate door sensors from metallic door or window frames
with spacers (1/2” or more)
• Door sensors and magnets should be no farther apart than
1/2” when the door or window is closed.
• Motion detectors should not be placed where they can detect
motion from outdoors.
• Smoke alarms should be placed on or near the ceiling.
• Gas leak detectors should be placed on or near the floor.

Fortress Technologies S6 Titan Specifications

General

Brand	Fortress Technologies
Model	S6 Titan
Category	Security System
Language	English