37
Working With Accessories
e S6 Titan main panel can be programmed with up to
100 accessories (150-foot range). It also has support for
connecting up to 2 zones of third-party wired sensors.
More than one wired sensor can be on the same zone.
e accessories are split up into categories in the system’s
menu.
• Remote Key Fobs
• Wireless Sensors / Detectors
• RFID Key Tags
• Secondary RFID Keypad
• Wireless Sirens
• Smart Outlets
• Wired Accessories
New systems have been pre-programmed by our technicians,
so the accessories should already work with the main panel.
Accessories that you add later will need to be programmed
with the main panel before they will work.
Programming Accessories to the Main Panel
To program an accessory to the main panel, set the panel
into a listening mode, and then trigger the accessory so that
it will send a signal to the main panel to be saved in mem-
ory.
Note: Whenever programming an accessory, you should
make sure that other accessories do not accidentally trigger.
For example, while programming a new door sensor, you
may rst want to turn o any motion detectors that would
pick up your motion.
To Next Page
Loading...
Need help?
General
