47
Wireless Sirens
e S6 Titan system works with one or more wireless si-
rens that can be placed anywhere within range of the panel
(150 feet). Like the other accessories, sirens that come with
your new system are pre-programmed by our technicians
so they should be working right out of the box.
If you purchase additional sirens at a later date, you can
easily add them to your system by following the steps in
this section.
Programming a Wireless Siren to the Main Panel
Main Menu -> Sensors -> Wireless Siren
e Wireless Sirens Menu is under
the Sensors Menu.
First, plug in and/or turn on the wireless siren. It’s also a
good idea to turn o and/or unplug any other sirens while
adding a new siren.
en, set the siren into programming mode. e steps for
doing that depend on which type of siren you’re adding.
See the following pages for instructions on setting your si-
ren into programming mode. Aer that, follow these steps
on your main panel.