Need help?Do you have a question about the Fortress Technologies S1 and is the answer not in the manual?
General| Wireless Protocol | 802.11a/b/g/n |
|---|---|
| Encryption | AES-256 |
| Compliance | FIPS 140-2 |
| Authentication | WPA2-Enterprise |
| Network Interfaces | Ethernet |
| Management | Web-based |
System self-monitoring via WiFi or GSM SIM for alerts.
Dual connectivity via 2.4GHz WiFi and GSM SIM card.
Download the 'My Fortress' app for mobile system management.
System accessories are pre-programmed for immediate use.
Find help via website, videos, manual, FAQs, and customer support.
Diagram and basic description of the S1 GSM WiFi main panel.
Details on system communication methods and accessory signal range.
Description of WiFi, Set, and Power buttons on the main panel.
Details on Wired Siren In and Power In (Micro-USB) ports.
Location and purpose of the GSM SIM card slot and bind code.
Explanation of different status light colors and their meanings.
List and description of common voice prompts from the main panel.
Instructions for arming, disarming, and triggering panic/SOS features.
Record zone numbers for accessory identification and location.
Verify accessory function and follow placement recommendations.
Download and install the 'My Fortress' mobile application.
Guide to activating and connecting the GSM SIM card for cellular service.
Steps to connect the main panel to your WiFi network via the mobile app.
Configure system notifications and adjust optional settings via app.
Manage contacts and control system functions via phone calls.
List of commands for controlling the system via phone.
Record and delete a custom voice message for alarm notifications.
Configure the system for central monitoring using Contact ID.
Set up a weekly schedule for automatic system arming and disarming.
Configure entry and exit delays for alarm events.
Enable SMS notifications for system arming and disarming events.
Configure notifications for power outages and low accessory batteries.
Configure siren duration and inbound call ring counts.
Adjusting voice and alarm volumes, and keytone beeps.
Procedure to disconnect the main panel from the WiFi network.
List of compatible accessories and general programming methods.
Steps to program remote key fobs to the main panel.
Steps to program wireless sensors like door contacts and motion detectors.
Organizing sensors into zones for easier identification of alarm locations.
Individual settings for sensors including name, type, mode, siren, chime, and delay.
Details on Normal, Disabled In Home, Emergency, and Disabled sensor modes.
Methods for triggering various sensor types during programming.
Using the 'My Fortress' app to program sensors and key fobs.
Using the RFID keypad for arming/disarming and managing passwords.
Using RFID key tags for temporary system access and de-programming.
Programming and installing wireless sirens for audible alerts.
Functionality of smart outlets and how to plug them in.
Steps to add and name smart outlets using the 'My Fortress' app.
How to control outlets and remove them from the system.
Steps to reset the main panel by unplugging and replugging power.
Guidance on replacing batteries in wireless accessories for optimal performance.
Tips for sensor placement to ensure reliable operation and avoid false alarms.
Procedure to reset the system to default settings, deleting all programming.
To Next Page
