Fortress Technologies S1 - Entry & Exit Delays

25
Delays - Entry & Exit Delay
e S1 GSM WiFi main panel has two delays that can be
congured, called the Entry Delay and the Exit Delay. You
can navigate to “Management -> Panel Settings” and then
tap on “Delay.”
Exit Delay
e Exit Delay will not take eect when you arm the S1
system using the mobile app or the remote key fobs. But, if
you arm the system by pressing the Central Button on the
S1 main panel, then you will be given some time to leave
the building before the alarm is armed. You can adjust that
time from 0 to 180 seconds.
Entry Delay
e Entry Delay is disabled on each sensor by default, but
you can enable the Entry Delay for each sensor individually.
is can be done in the Sensors menu of the My Fortress app.
To adjust he amount of time for the Entry Delay, you can
do that on this screen.