Foscam C1 Lite User Manual

42
If you don’t know the DNS server, you can use the same settings as the Default Gateway.
4.4.2 Wireless Settings
Step 1: Choose “Settings” on the top of the camera interface, and go to the “Network” panel on the
left side of the screen, then click “Wireless Settings.”
Set the same Subnet Mask and
gateway of the camera with your
PC.
There are two DNS servers. You
can set any of them. Same with
gateway is also OK.

Foscam C1 Lite Specifications

General

Brand	Foscam
Model	C1 Lite
Category	IP Camera
Language	English