Foscam C1 Lite - Default Parameters; Specifications

71
(3) Delete camera from app then re-add it back, also lower camera’s resolution.
6.1.10 Camera is added by others
When use myfoscam.com cloud or Foscam app, one camera can only be added to one account at the
same time. To solve error “This camera has already been added by another account” when add camera
to Foscam app or cloud, please send a clear photo of camera’s model sticker to Foscam support email
tech@foscam.com to unbind it.
More FAQs are available here:
https://www.foscam.com/faqs/index.html
6.2 Default Parameters
Default network Parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Embedded FOSCAM domain name
Username and password
Default admin username: admin with a blank password
6.3 Specifications
ITEMS
C1 Lite
Image Sensor
Sensor
High Definition Color CMOS Sensor
Display Resolution
1280 x 720 (1.0M Pixels)
Min. Illumination
N/A (Without IR Illuminator)
Lens
Lens Type
Glass Lens
focal length
f:2.8mm
Aperture
F 2.4
Angle of view
Horizontal:100°,Diagonal :115°
Video
Image Compression
H.264
Image Frame Rate
23fps, downward adjustable
Resolution
720P(1280 x 720), VGA(640 x 480), QVGA(320 x 240)
Stream
dual stream
Image adjustment
The hue, brightness, contrast, saturation, sharpness are
adjustable
Flip image
flip and mirror
Infrared mode
N/A (Without IR Illuminator)
Night visibility
N/A