reboot the camera again, or else the SD Card may be cannot work well.
The default storage path of alarm record files is SD card, when the available size of SD card is less than
256M, the old record files will be deleted automatically.
SD Card Management: After click the button, you should enter the username and password of the
camera. Then you can manage the recording files of the camera in the SD card. The SD card
management is only effective when access the camera in LAN.
Format(except C1): Click the button, you can format the SD card. Note that this will delete all files on the
SD card.
4.8 PTZ(Only R2)
This page will allow you to change the pan/tilt speed and do cruise tracks settings.
4.8.1 Pan & Tilt Speed
There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the desired PTZ
speed type and click save button.
There are three zoom speed types: fast, normal, slow.
To Next Page
Loading...
Need help?
General
