Time interval: The interval time between two pictures.
D Recording
If you select this checkbox, when the motion has been detected, the camera will record automatically
and store the record files to the SD Card. Make sure the camera has inserted SD card and you have
set the SD card as the Alarm record files storage path, please go to Record—> Storage location page
to verify this settings.
The default alarm record time is 30s and pre-alarm record time is 5s, please go to Record—> Alarm
Record page and change the alarm time settings.
E Push message to the phone
If you select this checkbox, when the motion has been detected, the camera will push the message to
the phone which has been connected the camera.
Step 7: Set detection area
Click set detect area and it pop up a window, then you can draw the detection area. Click Back button
after settings. When something moving in the detection area, the camera will alarm.
Step 8: Alarm Schedule
① Alarm anytime when motion is detected
Click the black button up the MON, you will see all time range turn red. When something moving in the
detection area at anytime, the camera will alarm.
② Specify an alarm schedule
Click the week day words, the corresponding column will be selected. For example, click TUE, the all
column of TUE turns to red, that means during Tuesday whole day, when something moving in the
detection area, the camera will alarm.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
