Foscam FI9803P - 2.2 Access the Camera in LAN; 2.2.1 Wired connection

w
w
www
www
.foscam.
.foscam.
us
us
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
8
2.2 Access the Camera in LAN
2.2.1 Wired connection
The camera supports HTTP and HTTPS protocols, you can access the camera in two ways.
(1) Http:// LAN IP + Http Port No.
The default HTTP port NO. is 88. Double click the IP Camera Tool icon to run, and it should find the camera’s
IP address automatically after you plug in the network cable.
Figure 2.2
Double click the IP address of the camera; the camera login page should be open in your default browser.
 Https:// LAN IP + Https Port no.
The default HTTPS port NO. is 443. You can use the URL to access the camera: https:// LAN IP + HTTPS port
NO.
Go to Settings - Network - Port panel, you can see and change the HTTP and HTTPS port NO.
Figure 2.3
NOTE：
When logging in for the first time, you will need to download and install the add-on.