Foscam FI9803P - Port

w
w
www
www
.foscam.
.foscam.
us
us
Foscam Digital Technologies LLC
Telephone: 1-800-930-0949
43
The camera’s software will be configured for port forwarding. There may be issues with your routers security
settings, and sometimes may error. We recommend you configure port forwarding manually on your router .
4.4.5 Port
This camera supports HTTP Port / HTTPS Port / ONVIF Port. HTTP Port is used to access the camera
remotely.
HTTP port: By default, the HTTP and Media port is set to 88. Also, they can be assigned with another port
number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21.
Figure 4.33
Another way to change the HTTP port no.
Step 1: Open the IP Camera Tool, select the camera you would like to change the port of, right click on the IP
address, and click on ”Network Configuration”, this brings up the network configuration box as shown in Figure
4.35 and 4.36.
Figure 4.34
Select which camera
you’d like to change the
port for, and right click .